Dynacord PM 502 8-Channel Powered Mixer

-10%

$500.00 $450.00

  • Class D amplifier and 2 x 450 watt loudspeaker outputs ensure a powerful, powerful sound
  • Five XLR inputs and three stereo input channels for capturing any desired ensemble format
  • Including USB connection and MP3 player for background music in a few seconds
  • Three band EQ per channel and seven band EQ on the master for total sound control
Compare
SKU: PM 502 8-Channel Powered Mixer Category:

    Description

    A mixer that packs a punch and more. The Dynacord PM 502 delivers high-power audio and a wide variety of functions to make your live sound life a breeze. Enough control options transmit your sound to the class-D amplifier and two 450-watt outputs. Sound engineers and bands looking for robust sound reinforcement – look no further.Extensive connectivity. Take every live sound situation closely with a mixer that is equipped to fill any space. Five XLR / jack combo connections and three stereo channels give you all the inputs you need for a variety of ensembles.Once connected, you can get the best out of your source audio thanks to three band EQs on each channel, along with a varied selection of effects and a graphical master QU. In between sets it is easy to play background music thanks to the built-in MP3 player on the front panel.

    Full description

    Your sound, the way you do …

    With precise control of every channel and bus, the PM 502 lets you be the master of your sound. 32 editable effects presets are available from the high quality DSP chip. A 7-band graphic EQ can be applied to each of the three master buses. Each input channel has gain, volume, AUX send, FX send and three EQ band controls. All this results in complete control over every detail of your sound.

    High impedance, 100 volt line switched on

    More than a live music amplifier. The Dynacord PM 502 is also equipped for the use of high impedance loudspeaker systems, ideal for public spaces and installation noises. It is easy to configure the PM 502 to control multiple low volume installation speakers over a very long cable routing. This makes it an ideal choice for bars, hotels, gyms, places of worship or any other location where public broadcasting and installation noise is required.

    Included in the box

    • 1 x PM 502 mixer tap PM 502
    • 1 x power cable
    • 1 x User manual
    • 1 x Safety instructions

    Characteristics

    • Mixing table with 5 x microphone / line & 3 stereo channels
    • 2 x 450W RMS at 4 & ohms at 4 & ohms
    • 32 customizable presets for HQ effects
    • Integrated MP3 audio player
    • 100-volt direct drive option

    Specifications

    • Channels (Mono and Stereo): 5 and 3
    • Microphone inputs : 5 x XLR / Jack Socket 5 x XLR / Jack Socket
    • Auxiliary units (FX, AUX): 1 post, 1 pre
    • Nominal out-put capacity
      • At 4Ω: 640W : 640W
      • At 8Ω: 350W
    • Maximum double channel output
      • At 4Ω: 2 x 600W : 2 x 600W
      • At 8Ω: 2 x 340W : 2 x 340W
    • Maximum out-put power for one channel
      • At 4Ω: 500W
      • At 8Ω: 280W
    • Maximum out-put power for the middle band
      • At 4Ω: 2 x 450W
      • At 8Ω: 2 x 270W : 2 x 270W
    • Nominal out-put capacity
      • At 4Ω: 2 x 400W
      • At 8Ω: 2 x 240W : 2 x 240W
    • Maximum output power, Direct Drive mode At 12Ω: 680W
    • Maximum output voltage
      • Dual Channel Mode : 52 VRMS : 52 VRMS
      • Direct Drive Type: 100 VRMS : 100 VRMS
    • THD at 1 kHz
      • Mic input to master AL / R Outputs, +10 dBu, Typical: <0.015%.
      • Mic input to loudspeaker output: <0.15 percent.
      • DIM 30, Mic input to loudspeaker output: <0.05 percent.
      • IMD-SMPTE, Mic input to loudspeaker output: <0.15 percent.
    • Frequency range, -3 dB
        • Every input to every mixer output: 15Hz – 22kHz – 22kHz
        • Each input to the loudspeaker output: 20Hz – 22kHz – 22kHz

    • Damping damping microphone damping switch damping
      • Amplifier Channel 1/2: <-85 dB
      • Channel to channel: <-78 dB
      • Attenuation of the microphone attenuation switch: > 100 dB
      • Channel VOL and FX / AUX Transmit damping: > 85 dB
      • CMRRR, Mic Input: > 80 dB
    • Input sensitivity, all level controls in maximum position, all level controls in maximum position
      • Mic: -65 dBu
      • Line (Mono): -45 dBu
      • Line (Stereo): -27 dBu
      • CD (Stereo): -27 dBu
    • All other outputs (Impedance balanced)
      • Mic Inputs, gain at Min position: +11 dBu
      • Mono Line Inputs, gain at Min Position: +30 dBu
      • Stereo Line Inputs: +26 dBu
      • Headphone output: +21 dBu
      • Master A, B, AUX outputs: +11 dBu
    • Input impedance
      • 2k & ohm ;
      • CD: 10kΩ
      • All other inputs: > 15kΩ
    • Output impedance
      • Headphone: 47Ω
      • All other outputs (Impedance balance): 150Ω
      • Main volume down: -129 dBu
    • Noise, channel inputs to master AL / R outputs
      • Main volume down: -99 dBu
      • Main volume center, all channels Volume down: -90 dBu
      • Main volume center, All Channel volume center: -85 dBu
    • Signal-to-noise ratio, power amplifier, A-Weighted, 450W 4Ω: 104 dB
    • Output stage Topology, Amplifier: Class D
    • Equalization
      • Low Suspending Filter: ± 15 dB / 60Hz
      • Middle peak filter: ± 12 dB / 2.4 kHz
      • High Suspensive Filter: ± 15 dB / 12 kHz
      • Master EQ 7 band: ± 10 dB / Q = 1.5
    • Filter
      • Low-cut filter, Microphone processing : 80Hz, 18 dB / oct. or 150Hz, 12 dB / oct. or 150Hz, 12 dB / oct.
      • Low-sharpened Filter, Amplifier: 50Hz or 70Hz, 18 dB / oct. 18 dB / oct.
    • Speaker processing: LPN, switchable
    • Delay Master B, selectable: 0-145 ms
    • Effects
      • Type: Stereo 24/48-piece Multi Effect Editor
      • Effects Preset effects: 32 Factory settings , user editable
      • Remote control: Footswitch
      • Display: 128 x 64 Pixels, LCD screens
    • Audio player (USB front panel)
      • Switching mode Power supply: VET 32
      • Supported audio file formats: MP3, WAV
      • Interface: USB2.0, Female Type A
      • USB power supply, maximum nominal current: 5V, 500 mA
    • Digital audio interface (USB on the rear panel)
      • Channels: 2 in, 2 out, 2 out
      • AD / DA conversion: 16-piece s, Delta-Sigma
      • Sample rate: 32 / 44.1 / 48kHz
      • PC interface: USB 2.0, female type B
    • Protection
      • Master A, B, AUX outputs: Adjustable peak valves, -10 – +11 dBu, -10 – +11 dBu
      • Amplifier: Audio limiters, High Temperature, DC, HF, Short circuit, Peak current limiters, Turn on Delay, Back EMF
      • Switching Mode Power Supply: Inflow Current Limits, Pipes Over / Under Voltage, Pipes Over Current, High Temperature, Current
    • Cooling: Continuous speed controlled fan
    • Phantom power, switchable: 48V DC
    • AC power supply: 100-240 V AC, 50-60Hz, 50-60 Hz
    • Power consumption, At 1/8 Maximum out-put power, 4Ω: 180W
    • Weight: 4.9 kg
    • Dimensions
      • Height: 244 mm
      • Width: 395 mm
      • Depth: 241 mm

    Additional information

    brands

    Dynacord

    labels

    New !

    Reviews

    There are no reviews yet.

    Be the first to review “Dynacord PM 502 8-Channel Powered Mixer”

    Your email address will not be published. Required fields are marked *